|
About us |
 |
 |
|
Written by Administrator
|
|
Wednesday, 03 December 2008 19:00 |
|
OpenEmbed is a small team consisting of electronics industry professionals from diverse backgrounds and disciplines. We provide specialized support Design of Single Board computers expertise in Hardware/Software co-design Design of Embedded Devices,such as ARM ,PowerPC,and linux drivers.
While analyzing potential sources for your board-level products, consider the advantages of working with us. Our team of specialists is here to make sure that your project goes smoothly from start to finish,because We look forward to our business, not once but time and time again.Receive product customization in quantities as low as 100 pieces at little or no additional cost. Fully custom designs are also available. Just enjoy your designes with our team! 开源实验室提供ARM ，PowerPC,单板机，同时提供软硬件的定制与半定制服务． Contact Information: Yitian village, Futian, ShenZhen,China TEL:+86-755-83434916 FAX:+86-755-83434916 E-mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
|
Last Updated ( Sunday, 21 December 2008 22:41 )
|
|
|
MiniTerm |
|
|
|
Written by Administrator
|
|
Wednesday, 03 December 2008 18:42 |
|
Product Overview MiniTerm is designed as a small size terminal for home automation, industry and other use.It is a highly integrated and fast computer-on-module with extreme low power consumption. It allows, due to the AT91SAM9261 SOC, the usage of the board without active cooling in applications, where space limitations are major requirements. Despite the very little board dimensions(90mm*54mm*8mm),the Miniterm offers a lot of standard interfaces such as CAN,RS485,USB, graphic. Technical Information Microcontroller : ATMEL AT91SAM9261 SOC 200MHz RAM : 64M SDRAM FLASH : 32M bit Data flash and 2G bit NAND flash CAN : A CAN 2.0B with 1000v ISO RS485 : A RS485 with 1000v ISO USB : A USB host and a USB slave DISPLAY : A 7 ‘ TFT interface with resolution ratio up to 800*480 INPUT :A 7’touch panel with the controller ADS7846 POWER CONSUME:5V@250MA |
|
Last Updated ( Monday, 22 December 2008 08:54 )
|
|
EPC-CS200A |
|
|
|
Written by Administrator
|
|
Thursday, 12 October 2006 06:13 |
|
EPC-CS200A is a SBC based on a 200MHz Cirrus Logic EP9315 SoC.It targets at automation control and medical care market. Technical Information - Processor -- Cirrus Logic EP9315 with a 200MHz ARM920T core and an MMU
- Memory -- 64MB SDRAM, 32MB NOR flash, expandable via optional USB key
- Display -- 8.4-inch LCD TFT VGA (640x480); 7.4-inch TFT WVGA (800x480)
- Networking -- 1 x 10/100 Ethernet
- USB -- 3 x Host 2.0 ports (full speed)
- UART -- 5x 16550-compatible UART ports
- Optional Communications -- USB-based WiFi receiver; GPRS modem
- Input--8x8 Matrix Keyboard or TouchScreen
- Storage--CF card in true IDE mode ;standard IDE harddisk interface
- Power -- 12V DC,0.25A
- Dimensions -- 3.775 x 3.550 inches (96 x90 mm)
|
|
Last Updated ( Monday, 22 December 2008 08:57 )
|
|
|
